go2rtc has been supervised since before this commit, with nothing to
serve: `CONTINUUM_GO2RTC_CONFIG` pointed at `./go2rtc.yaml`, and that
file did not exist in the repository or anywhere else. A watchdog was
restarting a process that had no cameras configured.
`camera.rs` writes it, from the `rtsp_url` a printer publishes in its own
`print.push_status` `ipcam` block rather than from `printers.toml`. The
URL is already something the machine tells us, so asking an operator to
keep a second copy of it - and to update it by hand when a printer's
address changes - would be asking for drift.
Two tasks, not one: the builder decides what should be served, the
watchdog keeps the thing serving it alive. They meet at one `Notify`,
because go2rtc reads its configuration only at startup, so a changed
config needs a restart. The watchdog now selects the child's exit against
that notification and skips its backoff on a deliberate change.
What this does *not* cover is most printers, and that is the honest
limit. Only the X1/H2 class publishes an RTSP URL - confirmed against two
real machines: the H2C reports
`rtsps://192.168.0.21:322/streaming/live/1`, the P1P reports an `ipcam`
block with `ipcam_dev: "1"` and no URL at all. "A camera exists" and "a
camera you can connect to" are different facts. A P1/A1 needs Bambu's
proprietary port-6000 JPEG stream, which this crate does not speak, so
those printers report no `camera_stream` and a UI should offer a player
only when one is present.
Details worth keeping:
- The config is rendered sorted so an unchanged fleet is byte-identical,
and on the first pass it is compared against the file on disk - without
that, every daemon restart rewrites an identical file and drops every
live viewer.
- Written through a `.tmp` and renamed. The watchdog can restart go2rtc at
any moment, and a half-written config fails to parse, which takes every
working stream down rather than one.
- Never logged, and gitignored: the credentials go in the URL because
that is the only place go2rtc takes them for an RTSP source, so the file
holds printer access codes.
- A reported URL with no scheme is refused rather than repaired. One bad
entry makes go2rtc fail to load the whole file.
- No `rtsp:` or `webrtc:` block. The API listener is what serves WebRTC to
a browser, which is the only consumer here; opening go2rtc's own RTSP
server would publish every printer's camera on the LAN unauthenticated.
- `stream_base_url` is reported in `hello`, not derived from the listen
address: `:1984` is a bind address and not something a browser can open.
Unset means "advertise nothing", which is the right default, because a
wrong URL makes the UI offer a player that cannot connect. It is a LAN
address either way - there is no relay, so this works for an operator in
the workshop and not for anyone outside it.
63 tests, clippy unchanged at the two deliberate variant-size warnings,
`cargo deny check licenses` ok. go2rtc itself stays operator-installed and
is not distributed.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The manual fetch_bambu_cert workflow works but needs two commands and a
printers.toml edit. ensure_trusted() collapses that into one call, using
the same trust model SSH uses for host keys:
- a pin already on disk (certs/pinned/<id>.pem) is used directly, no new
trust decision is made on every run
- no pin yet + bundled CA verifies fine (current-gen printers): nothing to
do
- no pin yet + bundled CA fails (P1P, etc.): auto-pins via
trust-on-first-connect, same as fetch_bambu_cert, but automatic
- an *explicit* pin (you set ca_cert_path yourself) never gets silently
auto-pinned over — a failure there is a real error
examples/auto_connect_bambu.rs demonstrates the one-command flow.
Verified all three states against local test servers, not just compiled:
first run with no pin auto-pins and connects; second run against the same
server is silent (no re-TOFU message) and just verifies against the pin;
third run after swapping the server's certificate correctly FAILS instead
of silently re-pinning — confirms the security property survives the
smoother UX.
New:
- printers.example.toml (committed template) / printers.toml (gitignored,
real hosts + access codes don't belong in git) — a list of real printers
with vendor, host, access_code/api_key/com_port, and an optional
per-printer CA override.
- src/fleet.rs loads that file into ready-to-use PrinterHandles, matching
vendor strings to the right constructor.
- BambuPrinter::test_tls_handshake() does a real (blocking, one-shot) TLS
handshake to port 8883 using that printer's configured BambuTls trust
mode — no MQTT protocol, just 'does the certificate verify'. Added
native-tls and toml as direct dependencies for this.
- examples/test_bambu_certs.rs loads printers.toml and runs the handshake
test against every Bambu entry.
Also fixes a real bug found while testing against unreachable IPs: plain
TcpStream::connect has no timeout and hung indefinitely on an offline
printer — switched to connect_timeout (5s).
Verified with cargo check --all-targets (0 errors) and by actually running
test_bambu_certs against a local printers.toml (correctly errored on a
missing cert file, then correctly timed out against unreachable test IPs
instead of hanging).
octoturgeandClaude Opus 5