BambuRequest::Info(InfoCommand) is now live (was commented out) —
examples/bambu_protocol_demo.rs constructs one, serializes it, and prints
it next to Bambu's real wire JSON for comparison. Run it and copy this
exact shape (proto message -> use it here -> add an enum variant) for
every other command.
Same override pattern as connect(): required, no default body, five
completely different bodies.
- BambuGenericPrinter::set_fan_speed_impl() is shared by BambuV1Printer and
BambuV2Printer (composition reuse, same as connect_impl) - both speak
the same MQTT gcode-injection mechanism.
- PrusaLinkPrinter and PrusaSerialPrinter both send the same M106 gcode
but over different transports (HTTP command injection vs. raw serial
bytes) - they share the percent->PWM conversion despite having unrelated
connect() implementations.
- KlipperPrinter uses a hypothetical Moonraker-native endpoint that takes
a percentage directly - no PWM conversion at all, since that math only
applies to the gcode-speaking vendors.
percent_to_pwm() lives in mod.rs as a private free function rather than a
trait default: it's genuine shared logic, but only for the subset of
vendors that need it, which is exactly the case a trait default can't
express cleanly. Visible to bambu.rs/prusa.rs via super:: because Rust's
module privacy reaches into child modules.
Verified with cargo check --all-targets and a full run of
printer_polymorphism: 50% converges on the same PWM value (127) across all
three gcode-based printers, Klipper's native path takes 0.50 directly.
id in printers.toml is just a label you chose for config purposes - nothing
ties it to a specific physical printer, and renaming it (or reusing it for
a different unit down the line) would silently break the pin lookup and
re-trigger trust-on-first-connect for hardware that was already trusted.
The serial number is the one thing about a printer that can't change, so
that's what a pin should be keyed by: certs/pinned/<sn>.pem instead of
certs/pinned/<id>.pem.
Verified against a real TLS server: pinned a printer under one id, renamed
it in printers.toml with the sn left unchanged, and confirmed the second
run found the existing pin silently (no re-TOFU) rather than re-pinning.
The manual fetch_bambu_cert workflow works but needs two commands and a
printers.toml edit. ensure_trusted() collapses that into one call, using
the same trust model SSH uses for host keys:
- a pin already on disk (certs/pinned/<id>.pem) is used directly, no new
trust decision is made on every run
- no pin yet + bundled CA verifies fine (current-gen printers): nothing to
do
- no pin yet + bundled CA fails (P1P, etc.): auto-pins via
trust-on-first-connect, same as fetch_bambu_cert, but automatic
- an *explicit* pin (you set ca_cert_path yourself) never gets silently
auto-pinned over — a failure there is a real error
examples/auto_connect_bambu.rs demonstrates the one-command flow.
Verified all three states against local test servers, not just compiled:
first run with no pin auto-pins and connects; second run against the same
server is silent (no re-TOFU message) and just verifies against the pin;
third run after swapping the server's certificate correctly FAILS instead
of silently re-pinning — confirms the security property survives the
smoother UX.
Completes the GenericPrinter -> BambuGenericPrinter -> BambuV1/V2 chain this
project wanted from the start. BambuGenericPrinter holds the fields and
behavior every Bambu printer shares (access code, serial number, CA trust,
the TLS test/fetch methods); BambuV1Printer and BambuV2Printer each *have*
one (composition) and are now genuinely separate types, ready to carry
flavour-specific report-schema fields later. Also threads through a new
'sn' (serial number) field the real MQTT topics will need.
Adds real 'fetch the CA automatically' capability, verified against a live
TLS server (not just compiled):
- BambuGenericPrinter::fetch_certificate() does trust-on-first-connect —
connects once with verification disabled, captures the certificate the
printer actually presents via native_tls's peer_certificate()/to_der(),
and returns it as PEM. Deliberately a method you call once by hand
(examples/fetch_bambu_cert.rs), not something connect() falls back to
silently, since TOFU trusts whoever's on the network the moment you run
it. Verified end-to-end against a local openssl s_server: the fetched
PEM's SHA-256 fingerprint exactly matched the server's real certificate.
- Verified the other direction too: test_bambu_certs (bundled-CA mode)
correctly REJECTS that same test server's cert, since it wasn't signed
by the real Bambu CA.
Splitting BambuV1Printer/BambuV2Printer into distinct types broke the
PrinterHandle::BambuV1(x) | PrinterHandle::BambuV2(x) or-pattern in both
examples (or-patterns require every alternative to bind the same type) —
fixed by giving each variant its own match arm.
New:
- printers.example.toml (committed template) / printers.toml (gitignored,
real hosts + access codes don't belong in git) — a list of real printers
with vendor, host, access_code/api_key/com_port, and an optional
per-printer CA override.
- src/fleet.rs loads that file into ready-to-use PrinterHandles, matching
vendor strings to the right constructor.
- BambuPrinter::test_tls_handshake() does a real (blocking, one-shot) TLS
handshake to port 8883 using that printer's configured BambuTls trust
mode — no MQTT protocol, just 'does the certificate verify'. Added
native-tls and toml as direct dependencies for this.
- examples/test_bambu_certs.rs loads printers.toml and runs the handshake
test against every Bambu entry.
Also fixes a real bug found while testing against unreachable IPs: plain
TcpStream::connect has no timeout and hung indefinitely on an offline
printer — switched to connect_timeout (5s).
Verified with cargo check --all-targets (0 errors) and by actually running
test_bambu_certs against a local printers.toml (correctly errored on a
missing cert file, then correctly timed out against unreachable test IPs
instead of hanging).
Certs:
- Vendor Bambu's shared LAN-mode root CA (certs/bambu_ca2.pem, verified
self-signed CA:TRUE, see certs/README.md for provenance/fingerprint).
- Config gains bambu_ca_cert_path (per-printer override) and
bambu_require_valid_cert (the allow/reject flag); printer::bambu::BambuTls
turns those into BundledCa/Custom/Insecure. connect() doesn't perform a
real handshake yet (no TLS-capable MQTT client wired in), just reports
which trust mode it would use.
Also reconciles a rename in flight (Printer -> GenericPrinter trait) and
finishes the PrusaPrinter -> PrusaLinkPrinter/PrusaSerialPrinter split:
added the missing GenericPrinter impl for PrusaSerialPrinter, fixed
PrinterHandle's variant payload types, updated mod.rs's pub use list and
doc comments, and updated the example to the new 5-variant shape.
Verified with cargo check --all-targets (0 errors) and a full run of
cargo run --example printer_polymorphism.
Drop reqwest, RPITIT+Send signature, and multi-variant error enum from the
teaching example so the only new idea per file is the trait override itself.
Real networking stays in adapters/, unaffected.
octoturge
