{
  "$schema": "https://json-schema.org/draft/2020-12/schema",
  "$id": "https://git.octoturge.com/Continuum/continuum-schemas/raw/branch/main/schemas/bambulab/v1/report/print/push_status.schema.json",
  "title": "PushStatusReport",
  "description": "The ongoing print-state push (root key \"print\") - NOT a direct reply to the pushall request (that goes to \"pushing\", see request/pushing/pushall.schema.json). Sending pushall makes the printer start/refresh this stream; it isn't itself request/response, which is also why this is its own category folder rather than sitting under pushing/ - a category here is 'what root key does this arrive under', not 'what triggered it'.",
  "allOf": [
    { "$ref": "../../../common/envelope.schema.json" },
    {
      "type": "object",
      "properties": {
        "command": { "const": "push_status" },

        "msg": {
          "type": "integer",
          "description": "Whether this push is the whole object or only what changed: 0 forced/full (what a pushing.pushall triggers), 1 automatic/partial. Confirmed against a real printer. A v1 consumer MUST read this - merging a partial push as if it were full leaves the picture complete, but replacing the cached object with a partial one silently unsets every field the push did not mention. It cannot be inferred any other way, because push_status does not echo sequence_id (see the module description), so there is no correlation back to the pushall that asked for it. v2 sends the whole object every time and this field is informational there."
        },

        "upgrade_state": { "$ref": "../../common/upgrade_state.schema.json" },
        "ipcam": { "$ref": "../../common/ipcam.schema.json" },
        "upload": { "$ref": "../../common/upload.schema.json" },
        "net": { "$ref": "../../common/net.schema.json" },
        "hms": { "$ref": "../../common/hms.schema.json" },
        "online": { "$ref": "../../common/online.schema.json" },
        "ams": { "$ref": "../../common/ams/ams.schema.json" },
        "vt_tray": { "$ref": "../../common/vt_tray.schema.json" },
        "lights_report": { "$ref": "../../common/lights_report.schema.json" },
        "xcam": { "$ref": "../../common/xcam.schema.json" },

        "nozzle_diameter": { "$ref": "../../common/nozzle_diameter.schema.json" },
        "nozzle_type": { "$ref": "../../common/nozzle_type.schema.json" },
        "nozzle_temper": { "type": "number" },
        "nozzle_target_temper": { "type": "number" },
        "bed_temper": { "type": "number" },
        "bed_target_temper": { "type": "number" },
        "chamber_temper": { "type": "number" },
        "chamber_target_temper": { "type": "number" },
        "fan_gear": { "type": "integer" },
        "heatbreak_fan_speed": { "type": "string" },
        "cooling_fan_speed": { "type": "string" },
        "big_fan1_speed": { "type": "string" },
        "big_fan2_speed": { "type": "string" },

        "s_obj": { "type": "array", "items": { "type": "number" } },
        "filam_bak": { "type": "array", "items": {} },
        "stg": { "type": "array", "items": { "type": "number" } },

        "mc_print_stage": { "type": "string" },
        "mc_percent": { "type": "integer" },
        "mc_remaining_time": { "type": "integer" },

        "ams_status": { "type": "integer" },
        "ams_rfid_status": { "type": "integer" },
        "hw_switch_state": { "type": "integer" },
        "spd_mag": { "type": "integer", "minimum": 0, "maximum": 100 },
        "spd_lvl": { "type": "integer", "minimum": 1, "maximum": 4 },
        "print_error": { "type": "integer" },
        "lifecycle": { "type": "string", "enum": ["product"] },
        "wifi_signal": { "type": "string", "pattern": "^-([0-9]{1,2}|100)dBm$" },
        "gcode_state": { "type": "string", "enum": [ "idle", "IDLE", "finish", "FINISH", "running", "RUNNING" ] },
        "gcode_file_prepare_percent": { "type": "string" },
        "queue_number": { "type": "integer" },
        "queue_total": { "type": "integer" },
        "queue_est": { "type": "integer" },
        "queue_sts": { "type": "integer" },
        "project_id": { "type": "string" },
        "profile_id": { "type": "string" },
        "task_id": { "type": "string" },
        "subtask_id": { "type": "string" },
        "subtask_name": { "type": "string" },
        "gcode_file": { "type": "string" },
        "stg_cur": { "type": "integer" },
        "print_type": { "type": "string", "enum": [ "", "idle", "IDLE" ] },
        "home_flag": { "type": "integer" },
        "mc_print_line_number": { "type": "string" },
        "mc_print_sub_stage": { "type": "integer" },
        "sdcard": { "type": "boolean" },
        "force_upgrade": { "type": "boolean" },
        "mess_production_state": { "type": "string", "enum": [ "active", "inactive",  "ACTIVE", "INACTIVE" ] },
        "layer_num": { "type": "integer" },
        "total_layer_num": { "type": "integer" },
        "cali_version": { "type": "integer" },
        "k": { "type": "string" },
        "flag3": { "type": "integer" }
      }
    }
  ]
}