octoturge
d8b7430296
New: - printers.example.toml (committed template) / printers.toml (gitignored, real hosts + access codes don't belong in git) — a list of real printers with vendor, host, access_code/api_key/com_port, and an optional per-printer CA override. - src/fleet.rs loads that file into ready-to-use PrinterHandles, matching vendor strings to the right constructor. - BambuPrinter::test_tls_handshake() does a real (blocking, one-shot) TLS handshake to port 8883 using that printer's configured BambuTls trust mode — no MQTT protocol, just 'does the certificate verify'. Added native-tls and toml as direct dependencies for this. - examples/test_bambu_certs.rs loads printers.toml and runs the handshake test against every Bambu entry. Also fixes a real bug found while testing against unreachable IPs: plain TcpStream::connect has no timeout and hung indefinitely on an offline printer — switched to connect_timeout (5s). Verified with cargo check --all-targets (0 errors) and by actually running test_bambu_certs against a local printers.toml (correctly errored on a missing cert file, then correctly timed out against unreachable test IPs instead of hanging).
36 lines
1.0 KiB
TOML
36 lines
1.0 KiB
TOML
# Copy this file to printers.toml (gitignored) and fill in your real
|
|
# printers. See src/fleet.rs for the loader, examples/test_bambu_certs.rs
|
|
# for a way to test a Bambu printer's certificate against this config.
|
|
|
|
[[printer]]
|
|
id = "p1p"
|
|
name = "P1P"
|
|
vendor = "bambu_v1" # bambu_v1 | bambu_v2 | prusa_link | prusa_serial | klipper
|
|
host = "192.168.1.50"
|
|
access_code = "REPLACE_WITH_ACCESS_CODE"
|
|
# P1P doesn't chain to the bundled CA — point this at a cert you've
|
|
# downloaded from the printer itself. Leave unset to use the bundled CA.
|
|
ca_cert_path = "./certs/p1p.pem"
|
|
|
|
[[printer]]
|
|
id = "h2c"
|
|
name = "H2C"
|
|
vendor = "bambu_v2"
|
|
host = "192.168.1.51"
|
|
access_code = "REPLACE_WITH_ACCESS_CODE"
|
|
# No ca_cert_path — current-generation printers verify against the bundled
|
|
# CA (certs/bambu_ca2.pem) fine.
|
|
|
|
# [[printer]]
|
|
# id = "voron"
|
|
# name = "Voron 2.4"
|
|
# vendor = "klipper"
|
|
# host = "192.168.1.52"
|
|
|
|
# [[printer]]
|
|
# id = "mk4"
|
|
# name = "MK4"
|
|
# vendor = "prusa_link"
|
|
# host = "192.168.1.53"
|
|
# api_key = "REPLACE_WITH_API_KEY"
|