Print control (pause/resume/stop) and print start are now both confirmed
against the P1P on the LAN, and doing that turned up three real defects.
`start_uploaded_file` published fire-and-forget, so the printer's reply was
thrown away. Asking it to print a file it does not have returned `Ok(())`,
and watching `print.push_status` could not tell that apart from a successful
start, since both leave the machine IDLE for a while. The printer does in
fact answer - `{"command":"gcode_file","param":"...","reason":"error
string","result":"fail"}` - and it echoes the `sequence_id` we send, so
`request` correlates it. Both this and `control_print` now go out as
correlated requests and run the reply through `print_command_outcome`.
The upload and the print command disagreed about where files live. `upload`
cwd'd into `cache/` while the printable projects are in the card's root: the
root holds 43 `<name>.gcode.3mf` archives, `cache/` holds the printer's own
extracted `<project>_plate_N.gcode` working copies with `.gcode.bbl`
sidecars. Those extracted copies are not independently printable -
`gcode_file` with `param: "/cache/Cube_plate_1.gcode"` was rejected for a
file the FTPS listing shows is right there - while `project_file` with
`url: "ftp:///Cube.gcode.3mf"` started a print. So the destination is now a
parameter and both halves point at `SD_ROOT`.
What the hardware settled, recorded in the doc comments: the `ftp:///` url
spelling is right, `param: "Metadata/plate_1.gcode"` works for a
single-plate project, `use_ams: false` + `ams_mapping: ""` is accepted, and
a stop during PREPARE/RUNNING moves the printer to FAILED, which is how
Bambu reports an operator cancellation. What it did not settle: all three
control verbs answer `result: "success"` on an *idle* printer, so the reply
means "accepted", not "the state changed" - callers still have to read
`gcode_state` back.
`PrinterCommand::ControlPrint` makes this reachable from the cloud at all;
until now pause/resume/stop existed in the proxy with no way to send them.
Still no start-print variant, now for a different reason: the path around it
is missing, not the hardware proof.
Also: `list_dir` for any directory (how the layout above was found, without
sending a print command to guess), `request_raw` for probing an unconfirmed
command shape, and two examples - `bambu_cache_list` (read-only) and
`bambu_print_probe` (gated steps, `start` needing both IDLE and
--yes-start-a-real-print).
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
octoturgeandClaude Opus 5
4d644937af