//! Finding printers, so setting up a farm does not mean reading five fields
//! off each machine's screen and retyping them into `printers.toml`.
//!
//! `printers.toml` stays the source of truth. Discovery deliberately does not
//! write it and does not add printers to a running fleet, because **it cannot
//! learn a credential** - a Bambu access code is on the printer's own screen
//! and a PrusaLink API key is in its web UI, which is the point of both. What
//! discovery produces is a *candidate*: everything except the secret,
//! rendered as a `[[printer]]` block for a human to complete. `fleet::load`
//! rejects an entry whose credential is empty, which is why this prints
//! rather than appends - writing a half-finished entry into the file would
//! stop the gateway starting.
//!
//! # What can be found, and how much
//!
//! Detection splits into two tiers, and keeping them apart is what makes this
//! honest rather than optimistic:
//!
//! - **"something at this address speaks X"** needs no credential for any
//!   vendor, and is most of the value: it yields the address and the vendor,
//!   which is two of the three or four fields an entry needs.
//! - **the details** - serial, model, firmware, the operator's own name for
//!   the machine - only come from vendors that publish them unauthenticated.
//!
//! | Vendor | Probe | Tier 1 | Details |
//! |---|---|---|---|
//! | Bambu | TLS certificate on 8883 | yes | **serial number**, free |
//! | Bambu | SSDP on 2021/1990 | yes | model, name, bind state |
//! | Klipper | `GET :7125/printer/info` | yes | hostname + Klipper version, if its authorization allows |
//! | PrusaLink | `GET :80/api/version` | yes | none - every identity endpoint needs digest auth |
//! | Marlin over serial | USB descriptors in sysfs | yes | vendor/product strings, USB serial |
//! | Marlin over serial | `M115` handshake | yes | firmware and machine type - **but see the warning below** |
//!
//! # The three things worth knowing before extending this
//!
//! **Multicast does not cross a router.** SSDP finds the most about a Bambu
//! printer, but a gateway on a different VLAN from its printers hears
//! nothing, which is an ordinary way to run a workshop. Active probing is
//! what works from anywhere that can route to the machines, and that is why
//! the certificate read - not SSDP - is the dependable Bambu mechanism.
//!
//! **Opening a serial port resets the board.** On Arduino-based boards
//! toggling DTR, which opening the port does, reboots the printer -
//! `printer/marlin_serial.rs` documents this too. So a `M115` handshake on a
//! machine that happens to be printing *ruins the print*. Serial detection is
//! therefore passive by default: it reads USB descriptors out of sysfs and
//! opens nothing. The handshake is opt-in, per port, and says so.
//!
//! **Finding a printer is not being able to drive it.** The Klipper and
//! PrusaLink clients in `printer/` are stubs. Discovery still reports those
//! machines, because knowing what is on the network is useful before the
//! client exists, but a rendered entry for one carries a warning - otherwise
//! an operator pastes it in and gets a gateway that connects and does
//! nothing.
//!
//! # Verified, and not
//!
//! Verified live on 2026-10-19 against the only hardware available, two
//! Bambu printers: a P1P presented `CN = 01S09B441900143` (issuer `BBL CA`,
//! TLS 1.2) and an H2C `CN = 31B8BP5A1800585` (`BBL Device CA O1C2-V2`,
//! TLS 1.3), each an exact match for `printers.toml`, and a blind sweep of
//! their `/24` found exactly those two in 24s.
//!
//! **Unverified, and untestable from here:** SSDP (this host is routed to the
//! printers rather than on their segment, so their multicast cannot arrive),
//! the Klipper and PrusaLink probes (no such hardware), and all serial
//! detection (no serial device is attached, and `/sys/class/tty` holds
//! nothing but virtual consoles). Every parser those paths depend on is unit
//! tested against recorded protocol text, and each probe is tolerant by
//! design - a missing field costs a field, not the printer. `discover_printers
//! raw` dumps whatever actually arrives, so the first run on real hardware
//! shows its working rather than only its conclusion.

pub mod net;
pub mod report;
pub mod scan;
pub mod serial;

use std::net::{Ipv4Addr, SocketAddr, UdpSocket as StdUdpSocket};
use std::time::Duration;

use tokio::net::UdpSocket;
use tracing::{debug, warn};

/// The SSDP multicast group, which is the standard one - Bambu's discovery is
/// ordinary SSDP with vendor headers, not a protocol of its own.
pub const SSDP_GROUP: Ipv4Addr = Ipv4Addr::new(239, 255, 255, 250);

/// Both ports Bambu has been seen to announce on. 2021 is the current one;
/// 1990 is older firmware, and listening on both costs a socket.
pub const SSDP_PORTS: [u16; 2] = [2021, 1990];

/// Which kind of printer a candidate is, which decides what its entry needs.
///
/// These map one-to-one onto the `vendor` strings `fleet.rs` accepts, and the
/// mapping is the whole reason this enum exists rather than a string: a typo
/// in a rendered `vendor` produces a config file that fails to load, and the
/// compiler can prevent that.
#[derive(Debug, Clone, Copy, PartialEq, Eq)]
pub enum Vendor {
    Bambu,
    Klipper,
    /// Prusa's own implementation of the OctoPrint API, on an MK4/XL/MINI.
    PrusaLink,
    /// OctoPrint itself, or anything else serving its API.
    ///
    /// This is the honest default for a printer found by probing, because
    /// what a probe observes is "something here speaks the OctoPrint API" -
    /// never which implementation. Reporting `prusa_link` would assert a
    /// product nothing on the wire names.
    Octoprint,
    /// Marlin-family firmware over a raw serial port. Named for Prusa
    /// because that is what `fleet.rs` calls it, but
    /// `printer/marlin_serial.rs` drives any Marlin board the same way -
    /// there is nothing Prusa-specific in the transport.
    PrusaSerial,
}

impl Vendor {
    /// The exact string `fleet.rs` expects in `vendor`.
    pub fn toml_value(self) -> &'static str {
        match self {
            // Never a guessed `bambu_v1`/`bambu_v2`: this value auto-detects
            // the MQTT dialect on connect, and since a firmware update can
            // move a physical printer between them, a guess written into a
            // file goes stale silently.
            Vendor::Bambu => "bambu",
            Vendor::Klipper => "klipper",
            Vendor::PrusaLink => "prusa_link",
            Vendor::Octoprint => "octoprint",
            Vendor::PrusaSerial => "prusa_serial",
        }
    }

    /// Whether `printer/` can actually drive this vendor yet.
    ///
    /// Only Bambu is real. Reporting a printer the gateway cannot drive is
    /// still worth doing - it answers "what is on this network?" - but it has
    /// to be said out loud, or the entry looks finished when it is not.
    pub fn driver_is_implemented(self) -> bool {
        match self {
            Vendor::Bambu => true,
            // `printer/klipper.rs` and `printer/prusa.rs` are stubs whose
            // methods return without doing anything.
            Vendor::Klipper | Vendor::PrusaLink | Vendor::Octoprint => false,
            // `marlin_serial.rs` is a real transport, but
            // `PrusaSerialPrinter`'s command methods on top of it are not.
            Vendor::PrusaSerial => false,
        }
    }
}

/// How a candidate was found, which bounds how much it can know.
#[derive(Debug, Clone, Copy, PartialEq, Eq)]
pub enum Source {
    /// A Bambu SSDP announcement.
    Ssdp,
    /// The subject CN of the TLS certificate on Bambu's MQTT port.
    Certificate,
    /// An unauthenticated HTTP identity endpoint.
    HttpApi,
    /// USB descriptors read out of sysfs, with no port opened.
    UsbDescriptor,
    /// An `M115` handshake, which required opening the port.
    SerialHandshake,
}

impl Source {
    /// The `source` value in a `discovered_printers` message - see the
    /// backend's `discovered_printer.schema.json`, which is an enum there, so
    /// these strings are a contract and not a label.
    pub fn wire_value(self) -> &'static str {
        match self {
            Source::Ssdp => "ssdp",
            Source::Certificate => "certificate",
            Source::HttpApi => "http_api",
            Source::UsbDescriptor => "usb_descriptor",
            Source::SerialHandshake => "serial_handshake",
        }
    }
}

/// A printer found on the network or on a USB port, minus its credential.
#[derive(Debug, Clone, PartialEq, Eq)]
pub struct Candidate {
    /// What goes in `host` - or in `port`, for a serial candidate, where it
    /// is a device path like `/dev/ttyACM0`.
    pub host: String,
    pub vendor: Vendor,
    /// The printer's serial number. Bambu's MQTT topics are addressed by it,
    /// so for that vendor it is required rather than decorative.
    pub serial: Option<String>,
    pub model: Option<String>,
    /// The name the operator gave the printer, where the vendor reports one.
    pub name: Option<String>,
    /// `DevBind.bambu.com`: whether the printer is bound to a Bambu cloud
    /// account. Worth surfacing rather than acting on - a bound printer can
    /// still be driven over the LAN if LAN mode is on, and "bound" is the
    /// likeliest explanation for a printer that is visible here and then
    /// refuses to connect.
    pub bind_state: Option<String>,
    /// Firmware or software version, free-form, for an operator to recognise
    /// the machine by. Not rendered into the TOML - nothing in `fleet.rs`
    /// takes a version, and a stale one in a config file would be a lie.
    pub detail: Option<String>,
    /// Another vendor this could equally be, when the probe genuinely cannot
    /// tell - which today means only OctoPrint versus PrusaLink.
    ///
    /// Carried rather than resolved by guessing, because the operator knows
    /// what they own and the network does not. It renders as a comment above
    /// `vendor`, so changing it is a one-word edit in the file they are
    /// already pasting into.
    pub ambiguous_with: Option<Vendor>,
    pub source: Source,
}

impl Candidate {
    pub fn new(host: impl Into<String>, vendor: Vendor, source: Source) -> Self {
        Self {
            host: host.into(),
            vendor,
            serial: None,
            model: None,
            name: None,
            bind_state: None,
            detail: None,
            ambiguous_with: None,
            source,
        }
    }

    /// The wire form for `ClientMessage::DiscoveredPrinters`.
    ///
    /// `bind_state` is deliberately dropped. It is a Bambu-only fact about a
    /// cloud account, the cloud already knows more about its own accounts
    /// than an SSDP packet does, and the one thing it is good for here -
    /// explaining a printer that is visible and then refuses to connect -
    /// is a diagnosis for someone standing in front of the machine, which is
    /// what `examples/discover_printers.rs` prints it for.
    pub fn to_wire(&self) -> crate::uplink::DiscoveredPrinter {
        crate::uplink::DiscoveredPrinter {
            vendor: self.vendor.toml_value(),
            address: self.host.clone(),
            serial: self.serial.clone(),
            model: self.model.clone(),
            name: self.name.clone(),
            detail: self.detail.clone(),
            ambiguous_with: self.ambiguous_with.map(Vendor::toml_value),
            source: self.source.wire_value(),
            driver_ready: self.vendor.driver_is_implemented(),
        }
    }

    /// A `[[printer]]` block to paste into `printers.toml`.
    ///
    /// Each vendor gets the fields `fleet.rs` actually requires of it and no
    /// others, since an unused key is a key someone later has to work out the
    /// meaning of. The credential, where there is one, comes last, empty, and
    /// labelled - it is the one thing discovery cannot supply, and the entry
    /// does not load until a human supplies it.
    pub fn to_toml_entry(&self, id: &str) -> String {
        let name = self
            .name
            .clone()
            .or_else(|| self.model.clone())
            .unwrap_or_else(|| id.to_string());

        let mut out = String::new();
        if let Some(detail) = &self.detail {
            out.push_str(&format!("# {detail}\n"));
        }
        if !self.vendor.driver_is_implemented() {
            out.push_str(&format!(
                "# WARNING: continuum-proxy's {} client is still a stub - it will connect\n\
                 # and do nothing. Found and reported so you know it is there.\n",
                self.vendor.toml_value()
            ));
        }
        out.push_str("[[printer]]\n");
        out.push_str(&format!("id = {}\n", toml_string(id)));
        out.push_str(&format!("name = {}\n", toml_string(&name)));
        if let Some(other) = self.ambiguous_with {
            out.push_str(&format!(
                "# vendor: change to {:?} if that is what this is - nothing on the network\n\
                 # distinguishes them, so this is a guess only you can settle.\n",
                other.toml_value()
            ));
        }
        out.push_str(&format!("vendor = {}\n", toml_string(self.vendor.toml_value())));

        match self.vendor {
            Vendor::Bambu => {
                out.push_str(&format!("host = {}\n", toml_string(&self.host)));
                match &self.serial {
                    Some(sn) => out.push_str(&format!("sn = {}\n", toml_string(sn))),
                    // Required by `fleet.rs`, so a blank would not load
                    // either - but it must not be left looking filled in.
                    None => out.push_str("# sn = \"\"   # NOT FOUND - printer screen > Settings > Device\n"),
                }
                out.push_str("access_code = \"\"   # REQUIRED: printer screen > Settings > Network (LAN mode)\n");
            }
            // The only field `fleet.rs` wants, and Moonraker needs no
            // credential from us - it authorizes by client address.
            Vendor::Klipper => out.push_str(&format!("host = {}\n", toml_string(&self.host))),
            // One client, two flavours - same required fields.
            Vendor::PrusaLink | Vendor::Octoprint => {
                out.push_str(&format!("host = {}\n", toml_string(&self.host)));
                out.push_str("api_key = \"\"   # REQUIRED: the printer's or OctoPrint's web UI > API key\n");
            }
            Vendor::PrusaSerial => {
                out.push_str(&format!("port = {}\n", toml_string(&self.host)));
                // Stated rather than left to the default, because a serial
                // port that is wrong about its baud rate does not fail - it
                // returns noise, which is far harder to diagnose than a
                // refusal.
                out.push_str("baud_rate = 115200   # Marlin's usual default; check your firmware\n");
            }
        }
        if let Some(bind) = &self.bind_state
            && bind != "free"
        {
            out.push_str(&format!("# note: this printer reports DevBind = {bind:?} (bound to a Bambu account).\n"));
            out.push_str("# LAN mode has to be on for a gateway to drive it.\n");
        }
        out
    }

    /// A plausible `id` for the entry: short, stable, and filename-safe.
    ///
    /// Derived from the model or the operator's name rather than the serial,
    /// because this id is what appears in logs and in the cloud, and
    /// `01S09B441900143` is not something anyone recognises. Falls back to
    /// the serial's tail only when there is nothing else.
    pub fn suggested_id(&self) -> String {
        let basis = self
            .model
            .as_deref()
            .or(self.name.as_deref())
            .map(slug)
            .filter(|s| !s.is_empty());
        if let Some(slug) = basis {
            return slug;
        }
        match &self.serial {
            // The tail, not the head: serials share a model prefix, so the
            // last characters are what distinguishes two of the same machine.
            Some(sn) if sn.len() > 6 => format!("printer-{}", slug(&sn[sn.len() - 6..])),
            Some(sn) => format!("printer-{}", slug(sn)),
            None => {
                // A serial port has no identity but its path, and
                // `/dev/ttyACM0` makes a better id than `printer`.
                let from_path = self.host.rsplit('/').next().map(slug).filter(|s| !s.is_empty());
                from_path.unwrap_or_else(|| "printer".to_string())
            }
        }
    }
}

fn slug(input: &str) -> String {
    let mut out = String::new();
    for ch in input.chars() {
        if ch.is_ascii_alphanumeric() {
            out.push(ch.to_ascii_lowercase());
        } else if !out.ends_with('-') && !out.is_empty() {
            out.push('-');
        }
    }
    out.trim_end_matches('-').to_string()
}

/// Quotes a value for TOML, escaping what a basic string must escape.
///
/// None of these characters can appear in a serial or an IP address, but the
/// name comes from whatever the operator typed into their slicer, and a stray
/// quote in it would otherwise produce a block that does not parse.
fn toml_string(value: &str) -> String {
    let mut out = String::with_capacity(value.len() + 2);
    out.push('"');
    for ch in value.chars() {
        match ch {
            '"' => out.push_str("\\\""),
            '\\' => out.push_str("\\\\"),
            '\n' => out.push_str("\\n"),
            '\r' => out.push_str("\\r"),
            '\t' => out.push_str("\\t"),
            other => out.push(other),
        }
    }
    out.push('"');
    out
}

/// Rejects anything that is not shaped like a printer serial number.
///
/// The point is not to validate a vendor's format - it is that this value
/// gets written into a config file as `sn`, and a `USN` carrying a UPnP UUID
/// or a human-readable device description would produce an entry that looks
/// filled in and then addresses a topic no printer publishes. Better to leave
/// it blank and say so.
pub(crate) fn valid_serial(value: String) -> Option<String> {
    let ok = (8..=32).contains(&value.len()) && value.chars().all(|c| c.is_ascii_alphanumeric());
    ok.then_some(value)
}

/// Parses one SSDP datagram, or `None` if it is not a Bambu announcement.
///
/// `from` is the sender's address, used when the message carries no usable
/// `Location` - which matters because the address a packet came from is the
/// one thing in a datagram that cannot be mistyped.
///
/// Tolerant on purpose: it extracts whatever headers are present rather than
/// requiring a full set. The exact header spelling is from Bambu's published
/// discovery format and has not been checked against a real announcement
/// here, so a missing vendor header has to mean "one fewer field filled in",
/// not "no printer found".
pub fn parse_ssdp(message: &str, from: Ipv4Addr) -> Option<Candidate> {
    let mut lines = message.lines();
    let start = lines.next()?.trim();

    // A NOTIFY is an unsolicited announcement; a `200 OK` is the reply to an
    // M-SEARCH. Anything else is rejected, which is what keeps a listener
    // from parsing the M-SEARCH queries it hears - including its own, which
    // arrive back on the same socket.
    let upper = start.to_ascii_uppercase();
    if !upper.starts_with("NOTIFY") && !upper.contains("200 OK") {
        return None;
    }

    let mut headers: Vec<(String, &str)> = Vec::new();
    for line in lines {
        if let Some((key, value)) = line.split_once(':') {
            headers.push((key.trim().to_ascii_lowercase(), value.trim()));
        }
    }
    let get = |name: &str| {
        headers
            .iter()
            .find(|(key, _)| key == name)
            .map(|(_, value)| *value)
            .filter(|value| !value.is_empty())
    };

    // Only claim a Bambu printer. Every UPnP device on a LAN - televisions,
    // routers, printers of the paper kind - announces on this same group, and
    // offering an operator a TOML block for their TV would be worse than
    // finding nothing.
    let device_type = get("nt").or_else(|| get("st")).unwrap_or("");
    let looks_bambu = device_type.to_ascii_lowercase().contains("bambulab")
        || headers.iter().any(|(key, _)| key.ends_with(".bambu.com"));
    if !looks_bambu {
        debug!(%from, %device_type, "ignoring a non-Bambu SSDP announcement");
        return None;
    }

    let host = get("location").map(host_from_location).unwrap_or_else(|| from.to_string());
    let mut candidate = Candidate::new(host, Vendor::Bambu, Source::Ssdp);
    candidate.serial = get("usn").map(|usn| usn.trim_start_matches("uuid:").trim().to_string()).and_then(valid_serial);
    candidate.model = get("devmodel.bambu.com").map(str::to_string);
    candidate.name = get("devname.bambu.com").map(str::to_string);
    candidate.bind_state = get("devbind.bambu.com").map(str::to_string);
    candidate.detail = get("devversion.bambu.com").map(|v| format!("Bambu firmware {v}"));
    Some(candidate)
}

/// Bambu's `Location` is a bare address, but SSDP's is a URL. Accept either.
fn host_from_location(location: &str) -> String {
    let without_scheme = location.split_once("://").map(|(_, rest)| rest).unwrap_or(location);
    let host = without_scheme.split('/').next().unwrap_or(without_scheme);
    // Strip a port, while leaving a bracketed IPv6 literal alone.
    match host.rsplit_once(':') {
        Some((before, after)) if !before.ends_with(']') && after.chars().all(|c| c.is_ascii_digit()) => {
            before.to_string()
        }
        _ => host.to_string(),
    }
}

/// Listens for SSDP announcements on one port for `window`, de-duplicated.
///
/// `raw` logs every datagram that arrives, Bambu or not, at info level. That
/// is here because this path cannot be tested from the development
/// environment: the printers are on `192.168.0.0/24` and the only host
/// available is routed to them from another subnet, so their multicast never
/// arrives - a router does not forward it. The first run on a real segment is
/// therefore also the first real test, and it should print what it saw rather
/// than only what it understood.
pub async fn listen_ssdp(port: u16, window: Duration, raw: bool) -> anyhow::Result<Vec<Candidate>> {
    let socket = bind_ssdp(port)?;
    let mut found: Vec<Candidate> = Vec::new();
    let mut buf = vec![0u8; 65_535];
    let deadline = tokio::time::Instant::now() + window;

    loop {
        let remaining = deadline.saturating_duration_since(tokio::time::Instant::now());
        if remaining.is_zero() {
            break;
        }
        let received = match tokio::time::timeout(remaining, socket.recv_from(&mut buf)).await {
            Ok(Ok(received)) => received,
            // The window closed, which is the ordinary way out.
            Err(_) => break,
            // One malformed or oversized datagram must not end the scan.
            Ok(Err(err)) => {
                warn!(?err, "SSDP receive failed");
                continue;
            }
        };
        let (len, from) = received;
        let text = String::from_utf8_lossy(&buf[..len]);
        let sender = match from {
            SocketAddr::V4(v4) => *v4.ip(),
            SocketAddr::V6(_) => continue,
        };
        if raw {
            tracing::info!(%from, bytes = len, "SSDP datagram:\n{}", text.trim());
        }
        if let Some(candidate) = parse_ssdp(&text, sender)
            && !found.iter().any(|existing| existing.host == candidate.host)
        {
            found.push(candidate);
        }
    }
    Ok(found)
}

/// Binds the SSDP port and joins the group on every interface.
///
/// `Ipv4Addr::UNSPECIFIED` as the interface asks the kernel to pick, which is
/// right for a gateway appliance: it may well have two interfaces and only
/// the operator knows which one faces the printers.
fn bind_ssdp(port: u16) -> anyhow::Result<UdpSocket> {
    let socket = StdUdpSocket::bind((Ipv4Addr::UNSPECIFIED, port)).map_err(|err| {
        anyhow::anyhow!("could not bind UDP :{port} for discovery: {err} (is another process using it?)")
    })?;
    socket
        .join_multicast_v4(&SSDP_GROUP, &Ipv4Addr::UNSPECIFIED)
        .map_err(|err| anyhow::anyhow!("could not join {SSDP_GROUP} on :{port}: {err}"))?;
    socket.set_nonblocking(true)?;
    Ok(UdpSocket::from_std(socket)?)
}

/// Drops candidates already covered by another, so one printer found twice is
/// reported once.
///
/// A sweep and an SSDP listen overlap on every Bambu printer, and the two
/// know different things - SSDP has the model and the operator's name, the
/// certificate has the serial - so the merge keeps whichever field is
/// present rather than preferring a source.
pub fn merge(mut found: Vec<Candidate>) -> Vec<Candidate> {
    let mut merged: Vec<Candidate> = Vec::new();
    for candidate in found.drain(..) {
        let existing = merged
            .iter_mut()
            .find(|other| other.host == candidate.host && other.vendor == candidate.vendor);
        match existing {
            Some(other) => {
                other.serial = other.serial.take().or(candidate.serial);
                other.model = other.model.take().or(candidate.model);
                other.name = other.name.take().or(candidate.name);
                other.bind_state = other.bind_state.take().or(candidate.bind_state);
                other.detail = other.detail.take().or(candidate.detail);
            }
            None => merged.push(candidate),
        }
    }
    merged
}

#[cfg(test)]
mod tests {
    use super::*;

    /// Bambu's announcement shape, with the vendor headers it is worth
    /// extracting. Not a capture - see `parse_ssdp`'s note.
    const NOTIFY: &str = "NOTIFY * HTTP/1.1\r\n\
        HOST: 239.255.255.250:2021\r\n\
        Server: UPnP/1.0\r\n\
        Location: 192.168.0.21\r\n\
        NT: urn:bambulab-com:device:3dprinter:1\r\n\
        USN: 31B8BP5A1800585\r\n\
        Cache-Control: max-age=1800\r\n\
        DevModel.bambu.com: O1C2\r\n\
        DevName.bambu.com: H2C\r\n\
        DevSignal.bambu.com: -48\r\n\
        DevConnect.bambu.com: lan\r\n\
        DevBind.bambu.com: free\r\n";

    #[test]
    fn an_announcement_yields_every_field_it_carries() {
        let found = parse_ssdp(NOTIFY, Ipv4Addr::new(10, 0, 0, 1)).expect("a Bambu announcement");
        assert_eq!(found.host, "192.168.0.21");
        assert_eq!(found.serial.as_deref(), Some("31B8BP5A1800585"));
        assert_eq!(found.model.as_deref(), Some("O1C2"));
        assert_eq!(found.name.as_deref(), Some("H2C"));
        assert_eq!(found.bind_state.as_deref(), Some("free"));
        assert_eq!(found.vendor, Vendor::Bambu);
        assert_eq!(found.source, Source::Ssdp);
    }

    #[test]
    fn a_missing_vendor_header_costs_one_field_and_not_the_printer() {
        // The whole reason the parser is tolerant: the header spelling is
        // unverified, so an announcement that spells `DevModel` differently
        // must still produce a usable candidate.
        let trimmed = NOTIFY.replace("DevModel.bambu.com: O1C2\r\n", "");
        let found = parse_ssdp(&trimmed, Ipv4Addr::new(10, 0, 0, 1)).expect("still a printer");
        assert_eq!(found.model, None);
        assert_eq!(found.serial.as_deref(), Some("31B8BP5A1800585"));
    }

    #[test]
    fn the_sender_address_stands_in_for_a_missing_location() {
        let without = NOTIFY.replace("Location: 192.168.0.21\r\n", "");
        let found = parse_ssdp(&without, Ipv4Addr::new(192, 168, 0, 21)).expect("a printer");
        assert_eq!(found.host, "192.168.0.21");
    }

    #[test]
    fn a_url_location_is_reduced_to_a_host() {
        for (location, expected) in [
            ("http://192.168.0.21:80/description.xml", "192.168.0.21"),
            ("http://192.168.0.21/", "192.168.0.21"),
            ("192.168.0.21", "192.168.0.21"),
        ] {
            let message = NOTIFY.replace("Location: 192.168.0.21", &format!("Location: {location}"));
            let found = parse_ssdp(&message, Ipv4Addr::LOCALHOST).expect("a printer");
            assert_eq!(found.host, expected, "for {location}");
        }
    }

    #[test]
    fn a_search_query_is_not_an_announcement() {
        // A listener hears its own M-SEARCH back off the multicast group, and
        // an M-SEARCH names a device type without naming a device - parsing
        // one would invent a printer at whatever address asked the question.
        let query = "M-SEARCH * HTTP/1.1\r\n\
            HOST: 239.255.255.250:2021\r\n\
            MAN: \"ssdp:discover\"\r\n\
            MX: 1\r\n\
            ST: urn:bambulab-com:device:3dprinter:1\r\n";
        assert!(parse_ssdp(query, Ipv4Addr::new(10, 200, 0, 4)).is_none());
    }

    #[test]
    fn another_vendors_upnp_device_is_ignored() {
        let television = "NOTIFY * HTTP/1.1\r\n\
            HOST: 239.255.255.250:1900\r\n\
            Location: http://192.168.0.9:8080/desc.xml\r\n\
            NT: urn:schemas-upnp-org:device:MediaRenderer:1\r\n\
            USN: uuid:4d696361-736f-6674-2d77-696e646f7773\r\n";
        assert!(parse_ssdp(television, Ipv4Addr::new(192, 168, 0, 9)).is_none());
    }

    #[test]
    fn a_usn_that_is_not_a_serial_is_dropped_rather_than_written_out() {
        let uuid = NOTIFY.replace("USN: 31B8BP5A1800585", "USN: uuid:4d696361-736f-6674-2d77-696e646f7773");
        let found = parse_ssdp(&uuid, Ipv4Addr::LOCALHOST).expect("a printer");
        assert_eq!(found.serial, None, "a UUID is not a serial and must not be written into `sn`");
        assert!(found.to_toml_entry("h2c").contains("# sn = \"\"   # NOT FOUND"));
    }

    #[test]
    fn a_bambu_entry_parses_as_toml_and_names_the_access_code() {
        let found = parse_ssdp(NOTIFY, Ipv4Addr::LOCALHOST).expect("a printer");
        let entry = found.to_toml_entry("h2c");
        let parsed: toml::Value = toml::from_str(&entry).expect("the emitted block must be valid TOML");
        let printer = &parsed["printer"][0];
        assert_eq!(printer["id"].as_str(), Some("h2c"));
        assert_eq!(printer["host"].as_str(), Some("192.168.0.21"));
        assert_eq!(printer["sn"].as_str(), Some("31B8BP5A1800585"));
        assert_eq!(printer["name"].as_str(), Some("H2C"));
        // Auto-detecting, not a guess from the TLS version - see `toml_value`.
        assert_eq!(printer["vendor"].as_str(), Some("bambu"));
        // Present and empty: the operator has to fill it in, and `fleet::load`
        // refuses the entry until they do.
        assert_eq!(printer["access_code"].as_str(), Some(""));
        // Bambu is the one vendor that works, so no stub warning.
        assert!(!entry.contains("WARNING"), "{entry}");
    }

    /// Each vendor's entry has to carry exactly the fields `fleet.rs`
    /// requires of it - this is the test that fails if those two drift apart.
    #[test]
    fn every_vendors_entry_carries_the_fields_its_loader_demands() {
        let cases = [
            (Vendor::Bambu, "192.168.0.21", vec!["host", "sn", "access_code"]),
            (Vendor::Klipper, "192.168.0.50", vec!["host"]),
            (Vendor::PrusaLink, "192.168.0.51", vec!["host", "api_key"]),
            (Vendor::Octoprint, "192.168.0.60", vec!["host", "api_key"]),
            (Vendor::PrusaSerial, "/dev/ttyACM0", vec!["port", "baud_rate"]),
        ];
        for (vendor, host, expected) in cases {
            let mut candidate = Candidate::new(host, vendor, Source::HttpApi);
            candidate.serial = Some("31B8BP5A1800585".to_string());
            let entry = candidate.to_toml_entry("x");
            let parsed: toml::Value = toml::from_str(&entry).unwrap_or_else(|err| panic!("{vendor:?}: {err}\n{entry}"));
            let printer = &parsed["printer"][0];
            assert_eq!(printer["vendor"].as_str(), Some(vendor.toml_value()));
            for key in &expected {
                assert!(printer.get(key).is_some(), "{vendor:?} must render {key}:\n{entry}");
            }
            // No stray keys: an unused one is a key someone later has to
            // work out the meaning of.
            for absent in ["host", "sn", "access_code", "api_key", "port", "baud_rate"] {
                if !expected.contains(&absent) {
                    assert!(printer.get(absent).is_none(), "{vendor:?} must not render {absent}:\n{entry}");
                }
            }
        }
    }

    #[test]
    fn a_vendor_with_a_stub_client_says_so_in_its_entry() {
        for vendor in [Vendor::Klipper, Vendor::PrusaLink, Vendor::Octoprint, Vendor::PrusaSerial] {
            let entry = Candidate::new("192.168.0.50", vendor, Source::HttpApi).to_toml_entry("x");
            assert!(entry.contains("WARNING"), "{vendor:?} is a stub and must say so:\n{entry}");
            assert!(entry.contains("stub"), "{vendor:?}:\n{entry}");
            // Still valid TOML, because the operator is meant to paste it.
            toml::from_str::<toml::Value>(&entry).expect("a warning must be a comment, not a syntax error");
        }
    }

    #[test]
    fn a_name_with_a_quote_in_it_still_renders_parseable_toml() {
        let awkward = NOTIFY.replace("DevName.bambu.com: H2C", "DevName.bambu.com: Bob\"s \\printer");
        let found = parse_ssdp(&awkward, Ipv4Addr::LOCALHOST).expect("a printer");
        let parsed: toml::Value = toml::from_str(&found.to_toml_entry("h2c")).expect("valid TOML");
        assert_eq!(parsed["printer"][0]["name"].as_str(), Some("Bob\"s \\printer"));
    }

    #[test]
    fn a_bound_printer_is_flagged_rather_than_hidden() {
        let bound = NOTIFY.replace("DevBind.bambu.com: free", "DevBind.bambu.com: bound");
        let found = parse_ssdp(&bound, Ipv4Addr::LOCALHOST).expect("a printer");
        let entry = found.to_toml_entry("h2c");
        assert!(entry.contains("DevBind"), "a bound printer needs the explanation: {entry}");
        assert!(entry.contains("LAN mode"));
    }

    #[test]
    fn a_firmware_version_is_a_comment_and_never_a_field() {
        // Nothing in `fleet.rs` takes a version, and one written into a
        // config file would be a lie the moment the printer updates.
        let versioned = NOTIFY.replace("DevBind.bambu.com: free", "DevVersion.bambu.com: 01.08.00.00");
        let found = parse_ssdp(&versioned, Ipv4Addr::LOCALHOST).expect("a printer");
        assert_eq!(found.detail.as_deref(), Some("Bambu firmware 01.08.00.00"));
        let entry = found.to_toml_entry("h2c");
        assert!(entry.contains("# Bambu firmware 01.08.00.00"));
        let parsed: toml::Value = toml::from_str(&entry).expect("valid TOML");
        assert!(parsed["printer"][0].get("detail").is_none());
    }

    #[test]
    fn an_id_is_suggested_from_the_model_then_the_name_then_the_serial() {
        let found = parse_ssdp(NOTIFY, Ipv4Addr::LOCALHOST).expect("a printer");
        assert_eq!(found.suggested_id(), "o1c2");

        let no_model = parse_ssdp(&NOTIFY.replace("DevModel.bambu.com: O1C2\r\n", ""), Ipv4Addr::LOCALHOST).unwrap();
        assert_eq!(no_model.suggested_id(), "h2c");

        let mut bare = Candidate::new("192.168.0.20", Vendor::Bambu, Source::Certificate);
        bare.serial = Some("01S09B441900143".to_string());
        // The tail distinguishes two of the same model; the prefix does not.
        assert_eq!(bare.suggested_id(), "printer-900143");

        // A serial port has no identity but its path, which still beats
        // calling it "printer".
        let port = Candidate::new("/dev/ttyACM0", Vendor::PrusaSerial, Source::UsbDescriptor);
        assert_eq!(port.suggested_id(), "ttyacm0");
    }

    #[test]
    fn an_operators_name_becomes_a_safe_id() {
        for (name, expected) in [("Bob's P1P!", "bob-s-p1p"), ("  spaced  out  ", "spaced-out"), ("!!!", "")] {
            assert_eq!(slug(name), expected, "for {name:?}");
        }
    }

    #[test]
    fn one_printer_found_by_two_mechanisms_is_reported_once_with_both_halves() {
        // SSDP knows the model and the operator's name; the certificate
        // knows the serial. Neither is complete, and an operator should not
        // have to merge two blocks by hand.
        let mut from_ssdp = Candidate::new("192.168.0.21", Vendor::Bambu, Source::Ssdp);
        from_ssdp.model = Some("O1C2".to_string());
        from_ssdp.name = Some("H2C".to_string());
        let mut from_cert = Candidate::new("192.168.0.21", Vendor::Bambu, Source::Certificate);
        from_cert.serial = Some("31B8BP5A1800585".to_string());

        let merged = merge(vec![from_ssdp, from_cert]);
        assert_eq!(merged.len(), 1);
        assert_eq!(merged[0].model.as_deref(), Some("O1C2"));
        assert_eq!(merged[0].serial.as_deref(), Some("31B8BP5A1800585"));
    }

    #[test]
    fn two_vendors_at_one_address_stay_separate() {
        // A Raspberry Pi can run Moonraker and have PrusaLink reachable
        // through it; merging those into one entry would invent a printer
        // that is neither.
        let merged = merge(vec![
            Candidate::new("192.168.0.50", Vendor::Klipper, Source::HttpApi),
            Candidate::new("192.168.0.50", Vendor::PrusaLink, Source::HttpApi),
        ]);
        assert_eq!(merged.len(), 2);
    }

    #[test]
    fn a_certificate_authoritys_name_is_not_a_serial_number() {
        // The failure mode this guards: an issuer CN sits earlier in the DER
        // than the subject's, so a scan for "the first CN" reports `BBL CA`.
        assert!(valid_serial("BBL CA".to_string()).is_none(), "a space disqualifies it");
        assert!(valid_serial("BBL Device CA O1C2-V2".to_string()).is_none());
        // Both real printers, as read off their certificates on 2026-10-19.
        assert_eq!(valid_serial("01S09B441900143".to_string()).as_deref(), Some("01S09B441900143"));
        assert_eq!(valid_serial("31B8BP5A1800585".to_string()).as_deref(), Some("31B8BP5A1800585"));
    }
}