Pointed at a real H2C that was 20% into a job, `print_status()` returned
nothing at all. The printer was in fact pushing a full status object every
second; every one was arriving, failing to deserialize, and being dropped
invisibly by an `if let Ok(report) = ..` with no `else`.
That silence produced two confidently-wrong claims in our own comments,
both corrected here:
- `pushall`'s doc said whether v2 emits `push_status` unprompted was "an
open question". It is not: v2 pushes a full 97-field object roughly once
a second from the moment you subscribe, no trigger needed. There is no
missing "other trigger" to hunt for.
- The "sequence gap" warning blamed the network for dropped v1 updates.
Those updates were not dropped in transit - they failed to parse, so
they never reached the counter, making the next one that did look like a
skip. Confirmed: seq 57, 62, 64 and 69 all arrived. After the fix, zero
gaps and zero parse failures across a 25s run against both printers.
Two concrete causes, both found with captured payloads:
- v1 trays carry `tray_temp`/`tray_time`; v2 trays carry
`drying_temp`/`drying_time`. All four were required, so *every* v1 push
carrying AMS data failed.
- A third tray shape existed that nothing modelled: an empty v2 slot sends
`{"id": "2", "state": 0}`, which matched neither `EmptyTray` (it denies
unknown fields, deliberately) nor `LoadedTray` (16 fields short).
A parse failure now reports itself, naming the printer, the sequence id and
the serde error. A report this process cannot parse is a defect in
`PrintReport`, and the only way to fix it is to be told which field.
`PrintReport` itself modelled 9 of 97 top-level fields, and none of them
were progress or temperature - it was built from a truncated example. It
now carries gcode_state, percent, layer counts, remaining time, nozzle/bed
temperatures, fan gears, wifi and HMS entries. `merge_from`'s two dozen
four-line blocks collapse to `newer.x.or(self.x.take())` one-liners: the
old shape made adding a field a three-place edit, and forgetting the merge
half produced a field that silently never survived a partial update.
Two scale traps documented where they bite: reported fan speeds are 0-15
gears, not percent and not the 0-255 PWM we send (`set_fan_speed(50)`
reads back as "7"); and v2 pins `sequence_id` to one value for minutes
while contents change, so it orders and identifies nothing there.
Two examples, and the distinction between them is the point. `live_reports`
is read-only and safe against a printer mid-job. `bambu_idle_checks`
writes, so it requires an explicit printer id and refuses to run unless
that printer reports `gcode_state: "IDLE"`.
Regression fixtures are verbatim captures off both printers, hardware
identifiers scrubbed - the only way to keep this from regressing without a
printer plugged in.
README/certs/README/.env.example/printers.example.toml were all still
describing this as a learning-stage stub with no real printer protocol
clients - rewritten to reflect the real Bambu MQTT client, cert
auto-pinning, and marlin serial connection that now exist.
- Remove examples/fetch_bambu_cert.rs: its manual fetch-and-save workflow
is now what BambuPrinter::connect()'s ensure_trusted does automatically
on every connect, so it has no remaining use case.
- Fix examples/printer_polymorphism.rs, which no longer compiled -
dispatch_gcode was replaced by real methods earlier this session;
swapped in print_status() as the vendor-only-extension example.
- Remove Config::bambu_ca_cert_overrides/bambu_require_valid_cert and the
.env vars documenting them - confirmed dead (nothing read them),
fully superseded by printers.toml's per-printer ca_cert_path/
require_valid_cert plus automatic trust-on-first-connect pinning.
- Fix stale doc comments in printer/mod.rs and printer/bambu.rs that
described certificate trust and MQTT as not built yet, or referencing
the now-removed example.
No behavior change in the daemon itself - verified with cargo build
--examples and a live run of printer_polymorphism and auto_connect_bambu
against the real P1P/H2C printers.
New:
- printers.example.toml (committed template) / printers.toml (gitignored,
real hosts + access codes don't belong in git) — a list of real printers
with vendor, host, access_code/api_key/com_port, and an optional
per-printer CA override.
- src/fleet.rs loads that file into ready-to-use PrinterHandles, matching
vendor strings to the right constructor.
- BambuPrinter::test_tls_handshake() does a real (blocking, one-shot) TLS
handshake to port 8883 using that printer's configured BambuTls trust
mode — no MQTT protocol, just 'does the certificate verify'. Added
native-tls and toml as direct dependencies for this.
- examples/test_bambu_certs.rs loads printers.toml and runs the handshake
test against every Bambu entry.
Also fixes a real bug found while testing against unreachable IPs: plain
TcpStream::connect has no timeout and hung indefinitely on an offline
printer — switched to connect_timeout (5s).
Verified with cargo check --all-targets (0 errors) and by actually running
test_bambu_certs against a local printers.toml (correctly errored on a
missing cert file, then correctly timed out against unreachable test IPs
instead of hanging).
Removed adapters/ (rumqttc MQTT, suppaftp FTPS, reqwest HTTP), plate_changer/
(tokio-serial), discovery/, and cache.rs (rusqlite) — src/printer/ already
covers 'talk to a printer' as simple stubs, so keeping a second, more complex
version alongside it was redundant. main.rs goes from 6 concurrent tasks to
2 (uplink + go2rtc). uplink/ drops channels, jitter, and Send-bound futures.
Verified with cargo build + cargo run --example printer_polymorphism.
octoturge