Fix print.push_status parsing, and stop losing reports silently

Pointed at a real H2C that was 20% into a job, `print_status()` returned
nothing at all. The printer was in fact pushing a full status object every
second; every one was arriving, failing to deserialize, and being dropped
invisibly by an `if let Ok(report) = ..` with no `else`.

That silence produced two confidently-wrong claims in our own comments,
both corrected here:

- `pushall`'s doc said whether v2 emits `push_status` unprompted was "an
  open question". It is not: v2 pushes a full 97-field object roughly once
  a second from the moment you subscribe, no trigger needed. There is no
  missing "other trigger" to hunt for.
- The "sequence gap" warning blamed the network for dropped v1 updates.
  Those updates were not dropped in transit - they failed to parse, so
  they never reached the counter, making the next one that did look like a
  skip. Confirmed: seq 57, 62, 64 and 69 all arrived. After the fix, zero
  gaps and zero parse failures across a 25s run against both printers.

Two concrete causes, both found with captured payloads:

- v1 trays carry `tray_temp`/`tray_time`; v2 trays carry
  `drying_temp`/`drying_time`. All four were required, so *every* v1 push
  carrying AMS data failed.
- A third tray shape existed that nothing modelled: an empty v2 slot sends
  `{"id": "2", "state": 0}`, which matched neither `EmptyTray` (it denies
  unknown fields, deliberately) nor `LoadedTray` (16 fields short).

A parse failure now reports itself, naming the printer, the sequence id and
the serde error. A report this process cannot parse is a defect in
`PrintReport`, and the only way to fix it is to be told which field.

`PrintReport` itself modelled 9 of 97 top-level fields, and none of them
were progress or temperature - it was built from a truncated example. It
now carries gcode_state, percent, layer counts, remaining time, nozzle/bed
temperatures, fan gears, wifi and HMS entries. `merge_from`'s two dozen
four-line blocks collapse to `newer.x.or(self.x.take())` one-liners: the
old shape made adding a field a three-place edit, and forgetting the merge
half produced a field that silently never survived a partial update.

Two scale traps documented where they bite: reported fan speeds are 0-15
gears, not percent and not the 0-255 PWM we send (`set_fan_speed(50)`
reads back as "7"); and v2 pins `sequence_id` to one value for minutes
while contents change, so it orders and identifies nothing there.

Two examples, and the distinction between them is the point. `live_reports`
is read-only and safe against a printer mid-job. `bambu_idle_checks`
writes, so it requires an explicit printer id and refuses to run unless
that printer reports `gcode_state: "IDLE"`.

Regression fixtures are verbatim captures off both printers, hardware
identifiers scrubbed - the only way to keep this from regressing without a
printer plugged in.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

src/printer/bambu_commands/print.rs

@@ -32,10 +32,69 @@ pub struct PrintReport {
     pub tray_is_bbl_bits: Option<String>,
     pub xcam: Option<XcamSettings>,
     pub xcam_status: Option<String>,
-    // The real payload has a lot more fields than shown here (this
-    // example was truncated) - add them the same way, one field per line,
-    // `Option<T>` for anything that isn't always present. Remember to
-    // also add each new field to `merge_from` below.
+
+    // --- Job progress. The reason this struct exists at all, for a print
+    // --- farm: a real capture has 97 top-level fields and the nine above
+    // --- contained none of the ones an operator actually wants.
+    /// `"IDLE"`, `"RUNNING"`, `"PAUSE"`, `"FINISH"`, `"FAILED"` - observed
+    /// `IDLE` on an idle P1P and `RUNNING` mid-print on an H2C. Treated as a
+    /// string rather than an enum deliberately: an unknown state should show
+    /// up as itself, not fail the whole report.
+    pub gcode_state: Option<String>,
+    /// Percent complete, 0-100. v2 also sends an identical `percent`.
+    pub mc_percent: Option<i32>,
+    /// Minutes remaining. v2 also sends an identical `remain_time`.
+    pub mc_remaining_time: Option<i32>,
+    pub layer_num: Option<i32>,
+    pub total_layer_num: Option<i32>,
+    /// Path on the printer, e.g. `/data/Metadata/plate_1.gcode`.
+    pub gcode_file: Option<String>,
+    /// The human-facing job name, e.g. a model filename.
+    pub subtask_name: Option<String>,
+    /// `0` when nothing is wrong.
+    pub print_error: Option<i32>,
+
+    // --- Temperatures. `f32` throughout, not `i32`: v1 reports an idle
+    // --- target as the integer `0` while v2 reports `35.0`, and serde
+    // --- widens an integer into a float but not the reverse.
+    pub nozzle_temper: Option<f32>,
+    pub nozzle_target_temper: Option<f32>,
+    pub bed_temper: Option<f32>,
+    pub bed_target_temper: Option<f32>,
+    /// Not sent by every model - absent from the H2C capture.
+    pub chamber_temper: Option<f32>,
+
+    // --- Fans and connectivity.
+    /// Fan speeds come back as *strings* holding a **0-15 gear**, not a
+    /// percentage and not the 0-255 PWM value `set_fan_speed` sends. All
+    /// three scales are in play at once, so converting carelessly gives a
+    /// number that looks plausible and is wrong:
+    ///
+    /// - we send PWM 0-255 (`M106 S<pwm>`, see `percent_to_pwm`),
+    /// - the operator thinks in percent 0-100,
+    /// - the printer reports gear 0-15.
+    ///
+    /// Confirmed live on a P1P: a full-speed heatbreak fan reads `"15"`, and
+    /// `set_fan_speed(50)` (PWM 127) read back as `"7"`. Divide by 15 for a
+    /// fraction, not by 100 and not by 255.
+    pub cooling_fan_speed: Option<String>,
+    pub heatbreak_fan_speed: Option<String>,
+    pub big_fan1_speed: Option<String>,
+    pub big_fan2_speed: Option<String>,
+    pub wifi_signal: Option<String>,
+
+    /// Health-management-system entries - the printer's own error/warning
+    /// list, empty when healthy. Left as raw JSON for now: an H2C mid-print
+    /// reported several `{attr, code}` pairs whose meaning needs decoding
+    /// against Bambu's HMS tables before it's worth a typed shape.
+    pub hms: Option<Vec<serde_json::Value>>,
+
+    // There are still ~60 more top-level fields in a real v2 payload (see
+    // `tests/fixtures/push_status_v2_h2c_printing.json` for the full set):
+    // the `job`/`device`/`net`/`upload` sub-objects, queue state, the
+    // `2D`/`3D` blocks, and so on. Add them the same way - one field per
+    // line, `Option<T>` unless it was seen on every capture from both
+    // generations. `merge_from` below needs no edit when you do.
 }
 
 impl PrintReport {
@@ -45,33 +104,55 @@ impl PrintReport {
     /// existing value alone instead of clobbering it. Not used for v2
     /// (always a full object) or for a `pushall`-triggered reply on
     /// either version (also guaranteed full) - see `BambuMqttSession`.
+    /// Every field below is the same one-liner:
+    /// `self.x = newer.x.or(self.x.take())`. `Option::or` returns the first
+    /// `Option` if it's `Some` and the second otherwise, so this reads as
+    /// "prefer the new value, fall back to what we had" - exactly the merge
+    /// rule, in the place a TS version would write `newer.x ?? self.x`.
+    /// `take()` is what makes it work for a `String`/`Vec` field too: it
+    /// moves the old value out and leaves `None` behind, since the value
+    /// can't be copied out of `self` and we're overwriting it anyway.
+    ///
+    /// This replaced two dozen four-line `if newer.x.is_some()` blocks. The
+    /// point isn't brevity for its own sake - it's that the old shape made
+    /// adding a field a three-place edit (struct, merge, and remembering to),
+    /// and forgetting the merge half produced a field that silently never
+    /// persisted across a partial update.
     pub fn merge_from(&mut self, newer: PrintReport) {
         self.envelope = newer.envelope;
         self.msg = newer.msg;
-        if newer.ams.is_some() {
-            self.ams = newer.ams;
-        }
-        if newer.ams_exist_bits.is_some() {
-            self.ams_exist_bits = newer.ams_exist_bits;
-        }
-        if newer.insert_flag.is_some() {
-            self.insert_flag = newer.insert_flag;
-        }
-        if newer.power_on_flag.is_some() {
-            self.power_on_flag = newer.power_on_flag;
-        }
-        if newer.tray_exist_bits.is_some() {
-            self.tray_exist_bits = newer.tray_exist_bits;
-        }
-        if newer.tray_is_bbl_bits.is_some() {
-            self.tray_is_bbl_bits = newer.tray_is_bbl_bits;
-        }
-        if newer.xcam.is_some() {
-            self.xcam = newer.xcam;
-        }
-        if newer.xcam_status.is_some() {
-            self.xcam_status = newer.xcam_status;
-        }
+
+        self.ams = newer.ams.or(self.ams.take());
+        self.ams_exist_bits = newer.ams_exist_bits.or(self.ams_exist_bits.take());
+        self.insert_flag = newer.insert_flag.or(self.insert_flag.take());
+        self.power_on_flag = newer.power_on_flag.or(self.power_on_flag.take());
+        self.tray_exist_bits = newer.tray_exist_bits.or(self.tray_exist_bits.take());
+        self.tray_is_bbl_bits = newer.tray_is_bbl_bits.or(self.tray_is_bbl_bits.take());
+        self.xcam = newer.xcam.or(self.xcam.take());
+        self.xcam_status = newer.xcam_status.or(self.xcam_status.take());
+
+        self.gcode_state = newer.gcode_state.or(self.gcode_state.take());
+        self.mc_percent = newer.mc_percent.or(self.mc_percent.take());
+        self.mc_remaining_time = newer.mc_remaining_time.or(self.mc_remaining_time.take());
+        self.layer_num = newer.layer_num.or(self.layer_num.take());
+        self.total_layer_num = newer.total_layer_num.or(self.total_layer_num.take());
+        self.gcode_file = newer.gcode_file.or(self.gcode_file.take());
+        self.subtask_name = newer.subtask_name.or(self.subtask_name.take());
+        self.print_error = newer.print_error.or(self.print_error.take());
+
+        self.nozzle_temper = newer.nozzle_temper.or(self.nozzle_temper.take());
+        self.nozzle_target_temper = newer.nozzle_target_temper.or(self.nozzle_target_temper.take());
+        self.bed_temper = newer.bed_temper.or(self.bed_temper.take());
+        self.bed_target_temper = newer.bed_target_temper.or(self.bed_target_temper.take());
+        self.chamber_temper = newer.chamber_temper.or(self.chamber_temper.take());
+
+        self.cooling_fan_speed = newer.cooling_fan_speed.or(self.cooling_fan_speed.take());
+        self.heatbreak_fan_speed = newer.heatbreak_fan_speed.or(self.heatbreak_fan_speed.take());
+        self.big_fan1_speed = newer.big_fan1_speed.or(self.big_fan1_speed.take());
+        self.big_fan2_speed = newer.big_fan2_speed.or(self.big_fan2_speed.take());
+        self.wifi_signal = newer.wifi_signal.or(self.wifi_signal.take());
+
+        self.hms = newer.hms.or(self.hms.take());
     }
 }
 
@@ -83,13 +164,19 @@ pub struct AmsState {
     pub ams: Vec<AmsUnit>,
 }
 
-/// One physical AMS unit (Bambu's numbering starts at 0 via `id`).
+/// One physical AMS unit (Bambu's numbering starts at 0 via `id`). Only
+/// `id` and `tray` were present on every unit across both captures, so the
+/// rest are optional - an H2C reports three units of different kinds
+/// (`n3f`/`n3s`) and they don't all carry the same fields.
 #[derive(serde::Deserialize, Debug, Clone)]
 pub struct AmsUnit {
-    pub humidity: String,
     pub id: String,
-    pub temp: String,
     pub tray: Vec<AmsTray>,
+    pub humidity: Option<String>,
+    pub temp: Option<String>,
+    pub humidity_raw: Option<String>,
+    pub dry_time: Option<i32>,
+    pub info: Option<String>,
 }
 
 /// A tray slot is either empty (just `id`) or loaded (the full field set)
@@ -107,20 +194,47 @@ pub enum AmsTray {
     Loaded(LoadedTray),
 }
 
+/// `deny_unknown_fields` stays - it's what stops a *loaded* tray (23 fields,
+/// a superset of this one) matching `Empty` first. But an empty slot is not
+/// always just `{"id": "..."}`: an H2C reports `{"id": "2", "state": 0}` on
+/// an empty slot, and that two-field shape matched neither variant, which
+/// failed the entire report (and so every `push_status` the printer sent
+/// while an AMS slot was empty). Captured in
+/// `tests/fixtures/push_status_v2_h2c_printing.json`.
+///
+/// Anything genuinely new here will fail loudly rather than be quietly
+/// dropped, which is the point of keeping `deny_unknown_fields`: better a
+/// visible error naming the field than a report that silently vanishes.
 #[derive(serde::Deserialize, Debug, Clone)]
 #[serde(deny_unknown_fields)]
 pub struct EmptyTray {
     pub id: String,
+    /// v2 sends this on an empty slot; v1 omits it entirely.
+    pub state: Option<i32>,
 }
 
+/// Captured from both generations (see `tests/push_status_parsing.rs`), and
+/// they do **not** agree. A v2 tray carries `drying_temp`/`drying_time`; a
+/// v1 tray carries `tray_temp`/`tray_time` and neither `drying_*` field.
+/// Every one of these was `String` (required) before, which meant every
+/// single v1 push carrying AMS data failed to deserialize - silently, so it
+/// looked like the printer simply wasn't sending anything. All four are
+/// `Option` now, and so is anything else only one generation was observed
+/// to send.
 #[derive(serde::Deserialize, Debug, Clone)]
 pub struct LoadedTray {
     pub id: String,
     pub bed_temp: String,
     pub bed_temp_type: String,
     pub cols: Vec<String>,
-    pub drying_temp: String,
-    pub drying_time: String,
+    /// v2 only.
+    pub drying_temp: Option<String>,
+    /// v2 only.
+    pub drying_time: Option<String>,
+    /// v1 only - the same idea as `drying_temp` under a different name.
+    pub tray_temp: Option<String>,
+    /// v1 only - the same idea as `drying_time` under a different name.
+    pub tray_time: Option<String>,
     pub nozzle_temp_max: String,
     pub nozzle_temp_min: String,
     pub remain: i32,
@@ -134,6 +248,15 @@ pub struct LoadedTray {
     pub tray_uuid: String,
     pub tray_weight: String,
     pub xcam_info: String,
+    /// Seen on both, but not in the original truncated example this struct
+    /// was built from.
+    pub state: Option<i32>,
+    pub cali_idx: Option<i32>,
+    pub ctype: Option<i32>,
+    pub total_len: Option<i64>,
+    /// Flow-calibration coefficients - v1 sends these on a loaded tray.
+    pub k: Option<f32>,
+    pub n: Option<i32>,
 }
 
 /// Camera-based AI print monitoring settings (spaghetti detection,