octoturge
ac484a99ba
e2e-edge.sh proves the camera signalling relay round-trips, and says so honestly - it posts a stub SDP with go2rtc absent and accepts a 503 that came back from the gateway. But "the offer round-trips" says nothing about whether anyone would see a picture, and it once read as more than it was: a stray go2rtc left over from an earlier run answered the stub with an HTTP 500 and the test still printed ok. Video had never been shown to flow. scripts/e2e-camera.sh runs the real backend, the real proxy and the real go2rtc against the H2C, and scripts/e2e-camera-peer.ts plays the browser's part with werift: createOffer, relay through the backend, setRemoteDescription, then ICE, DTLS and SRTP, counting RTP out the far end. Measured: 124-149 packets and ~119-147 KB of payload within a second or two. It sends no printer command; the camera is a pull and the MQTT subscription is passive. It refuses to start if a go2rtc is already running, and fails if one survives cleanup. werift is a devDependency for that one file; nothing under src/ imports it. Its 30 resolved packages were audited against LICENSES.md: 26 MIT, Apache-2.0, BSD-3-Clause, Unlicense, and one MPL-2.0 (mediabunny), which the policy allows while we do not edit its files. Smaller fixes in the same pass: - e2e-edge.sh now unsets the TURN variables. It asserts TURN is off, but sourcing dev-secrets.sh turns it on, and the failure message then printed the live Cloudflare username and credential. The new script prints only the camera id and a count, never the /stream body. - the last hardcoded `psql -h localhost` in e2e-edge.sh now uses DATABASE_URL, like the rest.
230 lines
11 KiB
Bash
Executable File
230 lines
11 KiB
Bash
Executable File
#!/usr/bin/env bash
|
|
# End-to-end test that a camera actually delivers video through the whole
|
|
# stack, not just that its signalling round-trips.
|
|
#
|
|
# e2e-edge.sh covers the relay with go2rtc deliberately absent: it posts a
|
|
# stub offer and treats a 503 that came back *from the gateway* as proof the
|
|
# message travelled. That is honest about what it proves, which is only the
|
|
# round trip. It cannot say a viewer would see anything, and it once read as
|
|
# more than it was because a stray go2rtc left over from an earlier run
|
|
# answered the stub with an HTTP 500 and the test still printed "ok".
|
|
#
|
|
# This one runs the real thing end to end:
|
|
#
|
|
# werift peer (stands in for the browser)
|
|
# -> POST /printers/:id/webrtc on the real backend
|
|
# -> /ws/edge/v1 -> the real continuum-proxy -> its real go2rtc
|
|
# -> RTSPS to the printer's camera
|
|
# and the RTP that comes back is counted.
|
|
#
|
|
# SAFETY: read-only against the printers. It sends no printer command of any
|
|
# kind; the proxy's MQTT subscription is passive and the camera is a pull of
|
|
# the existing stream. Printer credentials stay in continuum-proxy/printers.toml
|
|
# (gitignored) and are never read here beyond the id and name lines.
|
|
#
|
|
# Needs: a printer with an RTSP camera (an H2C - a P1P exposes none, see
|
|
# continuum-pending-hardware-tests finding 14), go2rtc, and these ports free:
|
|
# 1984 (go2rtc API, loopback) and 8555 (its WebRTC listener).
|
|
#
|
|
# Usage:
|
|
# scripts/dev-env.sh up && scripts/dev-env.sh schema
|
|
# scripts/e2e-camera.sh
|
|
#
|
|
# CAMERA_ID=h2c the gateway id (in printers.toml) with a camera
|
|
# GO2RTC_BIN=~/.local/bin/go2rtc
|
|
# PROXY_DIR=../continuum-proxy
|
|
# KEEP_DATA=1 leave the seeded farm behind for inspection
|
|
set -euo pipefail
|
|
|
|
REPO_ROOT="$(cd "$(dirname "${BASH_SOURCE[0]}")/.." && pwd)"
|
|
cd "$REPO_ROOT"
|
|
|
|
CAMERA_ID="${CAMERA_ID:-h2c}"
|
|
GO2RTC_BIN="${GO2RTC_BIN:-$HOME/.local/bin/go2rtc}"
|
|
PROXY_DIR="${PROXY_DIR:-$REPO_ROOT/../continuum-proxy}"
|
|
PORT="${PORT:-3040}"
|
|
AUTH_PORT="${AUTH_PORT:-3041}"
|
|
BASE="http://localhost:$PORT"
|
|
DATABASE_URL="${DATABASE_URL:-postgres://continuum:continuum@localhost:5432/continuum}"
|
|
VALKEY_URL="${VALKEY_URL:-redis://localhost:6379}"
|
|
EDGE_JWT_SECRET="${EDGE_JWT_SECRET:-e2e-edge-secret}"
|
|
# Nothing here presigns or uploads; the backend just refuses to boot without
|
|
# object-storage credentials (src/s3/index.ts).
|
|
R2_ACCESS_KEY_ID="${R2_ACCESS_KEY_ID:-e2e}"
|
|
R2_SECRET_ACCESS_KEY="${R2_SECRET_ACCESS_KEY:-e2e}"
|
|
R2_ENDPOINT="${R2_ENDPOINT:-http://localhost:9000}"
|
|
export DATABASE_URL VALKEY_URL EDGE_JWT_SECRET PORT
|
|
export R2_ACCESS_KEY_ID R2_SECRET_ACCESS_KEY R2_ENDPOINT
|
|
|
|
WORK="$(mktemp -d)"
|
|
BACKEND_PID=""
|
|
PROXY_PID=""
|
|
AUTH_PID=""
|
|
|
|
fail() { echo "FAIL: $*" >&2; exit 1; }
|
|
ok() { echo " ok: $*"; }
|
|
psql_q() { psql "$DATABASE_URL" -tAq -c "$1"; }
|
|
new_uuid() { cat /proc/sys/kernel/random/uuid; }
|
|
USER_ID="$(new_uuid)"
|
|
|
|
# The proxy supervises go2rtc, so it is the proxy's PID that has to die, and
|
|
# go2rtc with it. Anything that survives holds a printer access code in memory
|
|
# and answers the next run's offers - that exact leftover is how this script
|
|
# came to exist - so cleanup checks for it rather than assuming.
|
|
cleanup() {
|
|
local rc=$?
|
|
for pid in "$PROXY_PID" "$BACKEND_PID" "$AUTH_PID"; do
|
|
[ -n "$pid" ] && kill "$pid" 2>/dev/null || true
|
|
done
|
|
for _ in $(seq 1 20); do
|
|
[ -n "$PROXY_PID" ] && kill -0 "$PROXY_PID" 2>/dev/null || break
|
|
sleep 0.3
|
|
done
|
|
for pid in "$PROXY_PID" "$BACKEND_PID" "$AUTH_PID"; do
|
|
[ -n "$pid" ] && kill -9 "$pid" 2>/dev/null || true
|
|
done
|
|
if [ -z "${KEEP_DATA:-}" ] && [ -n "${ORG_ID:-}" ]; then
|
|
psql_q "DELETE FROM organisations WHERE id = '$ORG_ID'" >/dev/null 2>&1 || true
|
|
fi
|
|
if [ $rc -ne 0 ]; then
|
|
echo; echo "--- backend log (tail) ---"; tail -20 "$WORK/backend.log" 2>/dev/null || true
|
|
echo "--- proxy log (tail) ---"; tail -30 "$WORK/proxy.log" 2>/dev/null || true
|
|
fi
|
|
rm -rf "$WORK"
|
|
# A go2rtc that outlived us is a leak, not a detail.
|
|
sleep 0.5
|
|
if ps -eo comm | grep -qx go2rtc; then
|
|
echo "WARNING: a go2rtc process is still running after cleanup:" >&2
|
|
ps -eo pid,etime,cmd | awk '$3 ~ /go2rtc/' >&2
|
|
[ $rc -eq 0 ] && rc=1
|
|
fi
|
|
exit $rc
|
|
}
|
|
trap cleanup EXIT
|
|
|
|
# --- 0. preconditions ------------------------------------------------------
|
|
|
|
echo "==> checking preconditions"
|
|
psql_q "SELECT org_id FROM farms LIMIT 0" >/dev/null 2>&1 \
|
|
|| fail "no migrated database at DATABASE_URL - run scripts/dev-env.sh up && schema"
|
|
[ -x "$GO2RTC_BIN" ] || fail "no go2rtc at $GO2RTC_BIN (set GO2RTC_BIN)"
|
|
[ -f "$PROXY_DIR/printers.toml" ] || fail "no $PROXY_DIR/printers.toml"
|
|
grep -q "^id *= *\"$CAMERA_ID\"" "$PROXY_DIR/printers.toml" \
|
|
|| fail "printers.toml has no printer with id '$CAMERA_ID' (set CAMERA_ID)"
|
|
|
|
# A leftover go2rtc would answer for the one under test and make this pass or
|
|
# fail for reasons that have nothing to do with the code. Refuse to start.
|
|
if ps -eo comm | grep -qx go2rtc; then
|
|
fail "a go2rtc is already running - it would answer instead of the one under test: $(ps -eo pid,etime,cmd | awk '$3 ~ /go2rtc/' | head -2)"
|
|
fi
|
|
for p in 1984 8555; do
|
|
ss -ltnu 2>/dev/null | grep -q ":$p " && fail "port $p is already in use"
|
|
done
|
|
CAM_HOST="$(awk -v id="$CAMERA_ID" -F'"' '/^id *=/ {cur=$2} cur==id && /^(host|address|ip) *=/ {print $2; exit}' "$PROXY_DIR/printers.toml")"
|
|
if [ -n "$CAM_HOST" ]; then
|
|
timeout 4 bash -c "</dev/tcp/$CAM_HOST/322" 2>/dev/null \
|
|
|| fail "$CAMERA_ID ($CAM_HOST) refuses TCP 322: it has no RTSP camera, or is off"
|
|
ok "$CAMERA_ID accepts RTSP on 322"
|
|
else
|
|
ok "could not read $CAMERA_ID's address from printers.toml; skipping the 322 pre-check"
|
|
fi
|
|
|
|
# --- 1. seed ---------------------------------------------------------------
|
|
|
|
echo "==> seeding an organisation and a farm claiming '$CAMERA_ID'"
|
|
EDGE_PROXY_TOKEN="e2e-$(date +%s)"
|
|
ORG_ID="$(psql_q "INSERT INTO organisations (name) VALUES ('e2e camera org') RETURNING id")"
|
|
# `viewer`: the relay route asks for viewer, so seeding the weakest role that
|
|
# should work shows the camera is watchable without any authority to command.
|
|
psql_q "INSERT INTO org_members (org_id, user_id, role) VALUES ('$ORG_ID', '$USER_ID', 'viewer')" >/dev/null
|
|
FARM_ID="$(psql_q "INSERT INTO farms (name, org_id, edge_proxy_token)
|
|
VALUES ('e2e camera farm', '$ORG_ID', '$EDGE_PROXY_TOKEN') RETURNING id")"
|
|
psql_q "INSERT INTO printers (farm_id, name, vendor, gateway_printer_id)
|
|
VALUES ('$FARM_ID', 'camera under test', 'bambu', '$CAMERA_ID')" >/dev/null
|
|
CAM_UUID="$(psql_q "SELECT id FROM printers WHERE farm_id='$FARM_ID' AND gateway_printer_id='$CAMERA_ID'")"
|
|
ok "org $ORG_ID, farm $FARM_ID, viewer $USER_ID"
|
|
|
|
# --- 2. backend ------------------------------------------------------------
|
|
|
|
echo "==> starting the dev-auth issuer on :$AUTH_PORT and the backend on :$PORT"
|
|
bun scripts/dev-auth.ts --port "$AUTH_PORT" > "$WORK/auth.log" 2>&1 &
|
|
AUTH_PID=$!
|
|
AUTH_URL="http://localhost:$AUTH_PORT"
|
|
for _ in $(seq 1 40); do curl -sf "$AUTH_URL/auth/v1/.well-known/jwks.json" >/dev/null 2>&1 && break; sleep 0.25; done
|
|
curl -sf "$AUTH_URL/auth/v1/.well-known/jwks.json" >/dev/null 2>&1 || fail "dev-auth did not come up"
|
|
export SUPABASE_URL="$AUTH_URL"
|
|
USER_TOKEN="$(curl -sf "$AUTH_URL/token?sub=$USER_ID" | python3 -c 'import json,sys; print(json.load(sys.stdin)["access_token"])')"
|
|
bun run src/index.ts > "$WORK/backend.log" 2>&1 &
|
|
BACKEND_PID=$!
|
|
for _ in $(seq 1 60); do curl -sf "$BASE/health" >/dev/null 2>&1 && break; sleep 0.5; done
|
|
curl -sf "$BASE/health" >/dev/null || fail "backend did not become healthy"
|
|
TOKEN="$(curl -sf -X POST "$BASE/auth/edge-token" -H 'content-type: application/json' \
|
|
-d "{\"farmId\":\"$FARM_ID\",\"edgeProxyToken\":\"$EDGE_PROXY_TOKEN\"}" \
|
|
| python3 -c 'import json,sys; print(json.load(sys.stdin).get("token",""))')"
|
|
[ -n "$TOKEN" ] || fail "no edge token"
|
|
ok "backend healthy, edge token minted"
|
|
|
|
# --- 3. the real gateway, with the real go2rtc ------------------------------
|
|
|
|
echo "==> starting the real continuum-proxy, which spawns the real go2rtc"
|
|
( cd "$PROXY_DIR" && cargo build --quiet 2>&1 | tail -3 ) || fail "proxy did not build"
|
|
# STREAM_BASE_URL has to be set for /stream to answer 200; it is never
|
|
# dialled, because the media path here is the relay, not a gateway URL.
|
|
env -C "$PROXY_DIR" \
|
|
CONTINUUM_GATEWAY_ID=e2e-cam-gw \
|
|
CONTINUUM_FARM_ID="$FARM_ID" \
|
|
CONTINUUM_GATEWAY_TOKEN="$TOKEN" \
|
|
CONTINUUM_UPLINK_URL="ws://localhost:$PORT/ws/edge/v1" \
|
|
CONTINUUM_GO2RTC_BIN="$GO2RTC_BIN" \
|
|
CONTINUUM_GO2RTC_CONFIG="$WORK/go2rtc.yaml" \
|
|
CONTINUUM_STREAM_BASE_URL="http://e2e-gateway.invalid:1984" \
|
|
CONTINUUM_PRINTERS_PATH=printers.toml \
|
|
RUST_LOG=info \
|
|
"$PROXY_DIR/target/debug/continuum-proxy" > "$WORK/proxy.log" 2>&1 &
|
|
PROXY_PID=$!
|
|
|
|
echo "==> waiting for the camera to be advertised"
|
|
STREAM=""
|
|
for _ in $(seq 1 45); do
|
|
STREAM="$(curl -sf -H "authorization: Bearer $USER_TOKEN" "$BASE/printers/$CAM_UUID/stream" 2>/dev/null || true)"
|
|
[ -n "$STREAM" ] && break
|
|
sleep 1
|
|
done
|
|
[ -n "$STREAM" ] || fail "GET /printers/$CAM_UUID/stream never answered 200 - the gateway did not report a camera"
|
|
# Deliberately not echoed: with TURN configured the body carries a live
|
|
# username and credential, and printing it put them in a transcript once.
|
|
ok "the gateway advertises camera '$(printf '%s' "$STREAM" | python3 -c 'import json,sys; d=json.load(sys.stdin); print(d["cameraId"], "- iceServers:", len(d["iceServers"]))')'"
|
|
|
|
# The generated config holds the printer's access code and go2rtc's API
|
|
# password. $WORK is mode 0700, which hides a bad mode here, so the file's own
|
|
# mode is what is asserted - it was 0644 until this check caught it.
|
|
[ -f "$WORK/go2rtc.yaml" ] || fail "the proxy never wrote a go2rtc config"
|
|
mode="$(stat -c %a "$WORK/go2rtc.yaml")"
|
|
[ "$mode" = "600" ] || fail "go2rtc.yaml is mode $mode, but it holds an access code and must be 600"
|
|
ok "the generated go2rtc config is owner-only (mode $mode)"
|
|
|
|
# --- 4. the viewer ---------------------------------------------------------
|
|
|
|
echo "==> a real WebRTC peer plays the camera through the relay"
|
|
RESULTS="$(BASE="$BASE" PRINTER_UUID="$CAM_UUID" ACCESS_TOKEN="$USER_TOKEN" bun scripts/e2e-camera-peer.ts 2>&1 || true)"
|
|
SEEN=0; BAD=0
|
|
while IFS=$'\t' read -r verdict label; do
|
|
case "$verdict" in
|
|
ok) ok "$label"; SEEN=$((SEEN + 1)) ;;
|
|
FAILED) echo " FAILED: $label" >&2; SEEN=$((SEEN + 1)); BAD=$((BAD + 1)) ;;
|
|
esac
|
|
done < <(printf '%s\n' "$RESULTS" | grep -E "^(ok|FAILED)$(printf '\t')")
|
|
# Fewer results than the peer's five checks means it died before finishing,
|
|
# and a silent peer must not read as a pass.
|
|
if [ "$SEEN" -lt 5 ] && [ "$BAD" -eq 0 ]; then
|
|
BAD=1; echo " FAILED: the peer produced only $SEEN of 5 results" >&2
|
|
fi
|
|
if [ "$BAD" -ne 0 ]; then
|
|
printf '%s\n' "$RESULTS" | sed 's/^/ | /' >&2
|
|
fail "the camera did not deliver video"
|
|
fi
|
|
|
|
echo
|
|
echo "PASS - a real WebRTC peer received video from the printer's camera"
|
|
echo " through the backend relay, the uplink, the proxy and go2rtc."
|